- 21 -
3.2.1. SELECT A NOSEPIECE
WARNING
The nosepice must be selected according to the jaw system
used.
3.2.0. operatinG the riVetinG tool
DANGER
Check the tool for functionality without a blind rivet as the
rivet head can injure you if it fl ies off. Always wear safety
glasses.
WARNING
Prior to the initial commissioning of the device, comply with
the following instructions:
• Read the general safety instructions in
Chapter 1 & 2 thoroughly.
• Ensure that the riveting device is not
damaged and no parts are missing.
• The battery used must be approved by
HS-Technik GmbH for use with the riveting device.
• The battery should be fully charged.
You can use the riveting tool to process different sizes. Pay attention to the
exact specifi cation of the rivet and adjust the nosepiece and compression
bushing if necessary.
Max. rivet shaft ø 2.4 - 6.5mm / Max. rivet diameter ø 1.5 - 4.5 mm
Use SW12 and SW14 screwdrivers for assembly.
Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11-90
E-Mail: [email protected] – Internet: www.hs-technik.com
