Powerplus XQ POWXQ5330, Руководство пользователя

Страница: 9 / 14

POWXQ5330
EN
Copyright © 2013 VARO
P a g e | 9
www.varo.com
9.7 Adjustment of the saw blade and the base

Position a try square against the saw blade and the sawing table.

If the saw blade is not completely in line, then you can adjust the angle by means of the
screw.

After this, you can adapt the zero position on the graduated scale.
9.8 Switching ON / OFF
For your safety use both hands to switch the power tool on and off.

Connect the power tool to the power supply.

Pull the on/off switch (14) in the direction of the handle. The saw blade rotates as long as
you keep the switch engaged.

When you want to turn off the machine, you have to release the on/off switch (14).
9.9 Use of the laser
Your machine is provided with a laser function.
It helps you to saw through your workpiece at the right location.

Insert the cable in the socket.

Turn on the laser switch.

Loosen the 2 screws and remove the guard cap.

Loosen the other 2 screws and then moved the laser module back and forth, until it is
aligned with the saw blade.

Retighten all screws and reinstall the guard cap.