POWX07558T
EN
Copyright © 2018 VARO
P a g e
|
3
www.varo.com
SLIDING MITRE SAW 1650 W-210 MM
POWX07558T
1 APPLICATION
This power tool is intended as a stationary machine for making straight and cross cuts in
wood. You can saw hard and soft wood as well as chip and fibre boards.
Only adults may use this tool.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION (FIG. A & B)
1.
Protective hood
2.
Saw blade
3.
Side support bar
4.
Fence
5.
Saw table
6.
Lever
7.
Table insert
8.
Scale for mitre angle (horizontal)
9.
Mounting hole
10. Lock for clamping device
11. Clamp
12. ON / OFF switch laser
13. Slide bar
14. Operating handle
15. ON / OFF switch
16. Release lever
17. Retaining pin
18. Dust collection bag
19. Angle scale
20. Angle lock lever
21. Slide bar lock
22. Side support bar screws
23. Laser
24. Spindle lock
3 PACKAGE CONTENT LIST
▪
Remove all packaging materials.
▪
Remove remaining packaging and packing inserts (if included).
▪
Check that the package contents are complete.
▪
Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
▪
Keep the packaging materials as far as possible until the end of the warranty period. Then
take it to your local waste disposal system.
WARNING! Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
In this packaging, you can find:
1 sliding mitre saw
2 hex wrenches
1 set clamp
1 manual
2 side guides
1 dust bag
1 table 750 mm
If any parts are missing or damaged, please contact your dealer.
