POWX07558T
EN
Copyright © 2018 VARO
P a g e
|
10
www.varo.com
▪
Turn the plastic cover back in its original position and mount the front mounting screw from
the protective hood.
When replacing the saw blade, you can tighten the slide bar with the locking
knob (21).
10 CLEANING AND MAINTENANCE
Before performing any work on the equipment, pull the power plug.
10.1
Cleaning
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
▪
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Make sure no water can reach the inside of the power tool!
10.2
Connecting cable
If the connecting cable (or mains plug) is damaged, it must be replaced. Replacement of the
connecting cable should only be carried out by a qualified specialist (qualified electrician).
11 TECHNICAL DATA
Nominal Voltage
220-240 V ~ 50 Hz
Power rating
1650 W
No load speed
5000 min-1
Protection class
II
Blade size
210 mm x 30 mm x 2.8 mm
12 CUTTING CAPACITY
Worktable tilting
angle
Head tilting angle
Height x width (mm)
90°
90°
60 x 210 mm
45°
90°
60 x 145 mm
90°
45°
34 x 210 mm
45°
45°
34 x 145 mm
13 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
97 dB(A)
Acoustic power level LwA
110 dB(A)
ATTENTION!
Wear
hearing
protection
when
sound
pressure
is
over 85 dB(A).
