POWEG9012
EN
Copyright © 2019 VARO
P a g e
|
8
www.varo.com
▪
When using the tool as a leaf blower always work away from solid objects such as
walls, fences, etc. Whilst you work do not place the blow/vac tube too close to the
leaves. The tool will be more effective if you keep it at a certain distance away from
the leaves and blow the leaves forwards.
8.4
Switching operating mode (Fig. 5)
To switch the tool from blower mode to vacuum mode, simply switch it off at the main
switch and move the blow - vacuum function selector lever to the desired position.
8.5
Collection bag
Note: Before you remove and empty the collection bag ensure that the
tool has been disconnected from the mains power supply.
To empty the collection bag simply open the zip fastener, empty the bag and then close
the zip fastener again
When the collection bag is open you can also check the function of the blow/vac
’s slide
control. If there is a blockage in the tool, check this function and remove the blockage.
9
CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the
power plug.
9.1
Cleaning
▪
Keep the ventilation slots of the tool clean to prevent overheating of the engine.
▪
Regularly clean the tool housing with a soft cloth, preferably after each use.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
▪
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
9.2
Maintenance
Our tools have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and
regular cleaning.