POWEG9012
EN
Copyright © 2019 VARO
P a g e
|
6
www.varo.com
5.4
Power tool use and care
▪
Do not expect the power tool to do more than it can. Use the correct power tool for
what you want to do. A power tool will achieve better results and be safer if used in
the context for which it was designed.
▪
Do not use the power tool if the switch cannot turn it on and off. A power tool with a
broken switch is dangerous and must be repaired.
▪
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
▪
Store power tools, when not in use, out of the reach of children and do not allow
people who are not familiar with the power tool or these instructions to operate it.
Power tools are potentially dangerous in the hands of untrained users.
▪
Maintain power tools. Check for misalignment or jammed moving parts, breakages or
any other feature that might affect the operation of the power tool. If it is damaged,
the power tool must be repaired. Many accidents are caused by using poorly
maintained power tools.
▪
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking
into account the working conditions and the work which needs to be done. Using a
power tool in ways for which it was not intended can lead to potentially hazardous
situations.
5.5
Service
▪
Your power tool should be serviced by a qualified specialist using only standard
spare parts. This will ensure that it meets the required safety standards.
6
SPECIFIC SAFETY INSTRUCTIONS
▪
Make sure the power cord is kept behind and away from the device while you work.
▪
Always position yourself horizontally to the slope and make sure your feet are firmly
planted. Exercise particular caution whenever you change directions while working
on a slope.
▪
Walk at a measured pace while operating the blower. DO NOT RUN.
▪
Never direct the suction/blown air opening toward persons or animals.
▪
The blow/vac must not be used or starting until it has been fully assembled.
▪
Make sure the power cord is kept behind and away from the device while you work.
▪
If the power cord or extension cord are damaged while you work, unplug the blower
immediately.
▪
Never use the power cord as a handle to lift or carry the device.
▪
Always unplug the device under the following circumstances:
▪
When the blower is not in use, is being carried/transported, or is left unattended.
▪
While examining, cleaning or unclogging the device.
▪
When cleaning the device, performing maintenance on it, or attaching accessories to
it.
▪
If the device strikes a foreign object or begins vibrating abnormally.
▪
Use the blower in daylight or with adequate illumination.
▪
Bear in mind that the force generated by an electrical device can make you lose your
balance. Therefore, make sure that your feet are firmly planted and that your body is
well balanced when you are operating the device.
▪
Never operate the blower on damp or wet grass.
▪
Using the blower on sloping areas: Do not work in areas with unduly steep slopes.