POWDP8031
EN
Copyright © 2020 VARO
P a g e
|
7
www.varo.com
7.3 Inserting and removing the battery (Fig. 2-3)
▪
Hold the tool with one hand and the battery pack (8) with the other.
▪
To install: push and slide battery pack into battery port, make sure the release latch
on the rear side of the battery snaps into place and battery is secure before
beginning operation. (Fig. 2)
▪
To remove: Press the battery release latch and pull the battery pack out at the same
time. (Fig. 3)
7.4 Adjusting the light
’s direction (Fig. 4)
The work light head (1) can be turned 360°.
1
Loosen the adjustable knob (3).
2
Turn and adjust the work light head (1) to the desired position.
3
Retighten the adjustable knob (3).
7.5 ON/OFF button and power level button (Fig 5)
▪
This portable work light is equipped with an ON/OFF button (9) and a power level
button (10), which can adjust the portable
work light’s brightness.
▪
If you want to adjust the brightness, repeatedly push the power level button until the
desired light brightness is reached.
WARNING: Do not stare directly at the light beam. Never aim the beam at
any person or an object other than the work piece.
Do not deliberately aim the beam at people and ensure that it is not directed towards the
eye of a person for longer than 0.25 s.
7.6 Hanging hook (Fig. 6)
There is a hanging hook (5) inside the product package. For use, add it to the bottom of
the bracket (2).
When you need to hang the work light, just turn it outwards and take it out; afterwards, put
it back into the initial position.
8
CLEANING AND MAINTENANCE
Clean the housing only with a damp cloth. Do not use any solvents! Dry thoroughly
afterwards. In order to maintain battery capacity, we recommend the battery to be
completely discharged every one month and fully recharged again .Only store with a fully
charged battery and top-up the charge from time to time if stored for a long time. Store in a
dry and frost-free place, the ambient temperature should not exceed 40 °C.
