POW8002
EN
Copyright © 2015 VARO
P a g e
|
9
www.varo.com
9
CLEANING AND MAINTENANCE
note: always ensure that the saw is turned off and the plug is removed from
the mains supply before any repairs or maintenance are carried out.
9.1
Cleaning
After each use brush off any wood chippings with a soft brush. Pay special attention to the
inside of the dust extraction port (where the dust bag fits to the saw) as this is where there
will be a large build up if left for extended periods.
The motor of the saw should be cleared of any wood chippings as there would be a risk of
fire if they are allowed to build up over time (a soft brush or dry air could be used to clear
the motor).
Empty the bag after each use; there is a zip on the bag to allow for easy disposal of wood
chippings.
Ensure the blade guard is kept clean with a damp cloth (do not clean the guard or any part
of the saw with a corrosive solvent) to reduce the risk of injury.
Periodically oil all the moving parts on the saw to extend the life of the saw.
9.2
Maintenance
Our machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and
regular cleaning.
10 TECHNICAL DATA
Voltage
– frequency
230-240V
– 50Hz
Power rating
1400W
No load speed
5000min
-1
Blade size
Ø 210mm
Max cutting depth
50mm
Bore size
Ø 25.4mm
Number of teeth
24
Max cutting capacity
0° x 90°
50mm x 120mm
45° x 90°
30mm x 120mm
0° x 45°
50mm x 80mm
45° x 45°
30mm x 80mm
11 NOISE
Noise values measured according to relevant standard. (K = 3)
Acoustic pressure level LpA
89 dB(A)
Acoustic power level LwA
102 dB(A)
Noise emission values measured according to relevant standard. (K=3)
aw (Vibration)
2.7 m/s²
K = 1.5 m/s²