POWPG40140
EN
Copyright © 2019 VARO
P a g e
|
4
www.varo.com
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Read the manual before
using the machine.
Wear sturdy shoes with antiskid
soles!
Denotes risk of personal
injury or damage to the tool.
Wear approved hearing
protection and safety glasses.
In accordance with essential
safety standards of
applicable European
directives.
Wear good and sturdy gloves!
Keep a minimum distance of
15m between the machine
and third parties during use.
Wear good and solid working
clothes!
Watch out for particles
generated by the cutting
installation.
The exhaust fumes are toxic
and can cause suffocation!
Use the cutting installation
exclusively in combination
with the shrub knife.
WATCH OUT: Fire hazard!
Petrol and vapour are easily
inflammable!
Use the cutting installation exclusively in combination with the threading
head.
5 GENERAL SAFETY INSTRUCTIONS
Read all safety warnings and instructions.
5.1
Working area
▪
Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
▪
Do not operate tools in potentially explosive surroundings, for example, in the presence of
inflammable liquids, gases or dust. Tools create sparks which may ignite the dust or
fumes.
▪
Keep children and bystanders at a distance when operating a tool. Distractions can cause
you to lose control of it.
5.2
Personal safety
▪
Stay alert, watch what you are doing and use common sense when operating a tool. Do
not use a tool when you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention when operating a tool may result in serious personal injury.
▪
Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
▪
Remove any adjusting keys or spanners before turning on the tool. A spanner or key left
attached to a rotating part of the tool may result in personal injury.
