Powermatic Single End Dovetailer DT45, Руководство по эксплуатации

Страница: 6 / 32

6
Introduction
This manual is provided by WMH Tool Group, Inc., covering the safe operation and maintenance
procedures for a Model DT45 Single End Dovetailer. This manual contains instructions on installation,
safety precautions, general operating procedures, maintenance instructions and parts breakdown. This
machine has been designed and constructed to provide years of trouble free operation if used in
accordance to instructions set forth in this manual. If there are any questions or comments, please
contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web
site: www.wmhtoolgroup.com.
Description
The Model DT45 Dovetailer will make cleanly cut half-blind dovetails for drawer or box construction. A
four-sided template allows any of four pitches, from 1” up to 2-1/2”. The use of different dovetail pitches
will give a unique custom appearance to your work. The cutter is carbide-tipped. The machine is built to
last with cast iron and steel construction. The manual clamping system is quick and easy to use.
Specifications
Model Number...................................................................................................................................DT45
Stock Number...............................................................................................................................1791304
Minimum work piece size (in.)................................................................................................ 7-7/8 x 2-3/8
Maximum work piece size (in.)........................................................................................................31 x 11
Minimum dovetail height (in.) .............................................................................................................. 3/16
Maximum dovetail height (in.) ............................................................................................................... 3/4
Minimum front thickness (in.) .............................................................................................................. 9/32
Maximum front thickness (in.) ............................................................................................................ 1-3/4
Minimum side thickness (in.)............................................................................................................... 9/32
Maximum side thickness (in.)........................................................................................................... 1-3/16
Number of spindles.................................................................................................................................. 1
Spindle speed (RPM)...................................................................................................................... 18,500
Center-to-center dovetail spacing (in.) .......................................................................1, 1-1/2, 2, and 2-1/2
Table height from floor (in.).................................................................................................................... 35
Overall dimensions (L x W x H) (in.)........................................................................................ 33 x 33 x 61
Motor....................................................................................... TEFC, 1HP, 1Ph, 115/230V (prewired 115)
Dust collection ports diameter (in.).................................................................................. front 2-1/2, rear 4
Dust collection minimum CFM required................................................................................................ 500
Approximate Weight, Shipping/Net (lbs.)........................................................................................447/345
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group, Inc., reserves the right to change specifications at any time
and without prior notice, without incurring obligations.