www.oneremote.dk
4
PLUG & PLAY OPERATION
There is no programming needed to make the adaptor work. When connected sound from one
connected device is lead to the speakers in accordance with below truth table.
The PowerLink source will always have
priority over the AUX source. See the truth
table.
When detection of sound on the AUX input,
the Speaker Adaptor will power on the
speakers and loop the AUX source to the
speaker.
The speakers will remain powered on, until
no sound has been detected on the AUX
source for about a minute.
PowerLink
Source
AUX
PowerLink Out
ON
OFF
PowerLink source
ON
ON
PowerLink source
OFF
ON
AUX *1
OFF
OFF
Speaker off *1
*1 The speakers remain powered on for a minute
after sound disappears from the AUX source.
