Powerline PAB-139X, Руководство пользователя, Страница: 12 / 16

PAB-139X
STEP 2
BE CAREFUL TO ASSEMBLE ALL COMPONENTS
IN THE SEQUENCE THAT THEY ARE PRESENTED.
NOTE:
finger tighten all hardware in this step. DO NOT wrench tighten
until the last step. some components may be pre-assembled.
nylon lock nuts will not fully screw onto bolts, must wrench tighten.
2A. connect seat pad (E) to mainframe (A) using:
2 - (#2) M8X70mm hex head bolt
2 - (#5) M8 spring washer
2 - (#4) M8 washer
2B. insert roller bar (D) into the top rounded slot of
mainframe (A). insert foam rollers and end caps on
each side of the slot using:
2 - (#8) ø 3”X8” foam roller
2 - (#7)
ø
1” round end cap
2C. insert roller bar (D) into the bottom rounded slot of
mainframe (A). insert foam rollers and end caps on
each side of the slot using:
2 - (#8)
ø
3”X8” foam roller
2 - (#7)
ø
1” round end cap
12