POWERHANDLING PowerPallet 2000, Руководство пользователя

Страница: 20 / 29

PowerPallet User Manual Page 20 of 29
Operating Modes
The 3 modes of operation for the PowerPallet are described in table below. The Left LED indicates the current mode of operation.
Mode of Operation Left LED Driving Braking
Warehouse/Fast
Press
Mode-
Button
to
change
mode
GREEN
Tilt handle to speed control position,
and then slowly rotate the throttle in
the direction you wish the drive-wheel
to rotate
- Full braking applied when handle is upright. Optional brake
when handle is horizontal
- Braking is ON when the throttle is in neutral position
- Variable braking
1
effective when throttle is rotated in the
opposite direction of drive-wheel rotation
Truck/Slow
(1/4
th
speed of
Warehouse Mode)
YELLOW
With handle upright or tilted within the
speed control positional limits, slowly
rotate the throttle in the direction you
wish the drive-wheel to rotate - Optional brake when handle is horizontal
- Braking is ON when the throttle is in neutral position
- Variable braking
1
effective when throttle is rotated in the
opposite direction of drive-wheel rotation
Freewheel/Manual RED
- Drive disabled
- Allows operator to manually operate
the pallet-jack
- Braking is OFF when throttle is in neutral position
- Variable braking effective when throttle is rotated
forward/backward
Figure 10: Handle Positions for Warehouse & Truck Modes
1
Variable braking force is proportional to the relative degree of throttle rotation away from the neutral position.
Handle Positions for
Warehouse/Fast Mode
Handle Positions for
Truck/Slow Mode