POWER
handle
Charger
User Manual
PH-SG0
Technical Specifications
If you experience any problems with the product please contact
email: [email protected]
phone UK: +44 (0) 8453 889769
www.cel-global.com
READ INSTRUCTION MANUAL
KEEP DRY
GENERAL HAZARD
SAFETY ALERT
KEEP BYSTANDERS AWAY
© Copyright C Enterprise Limited 2012
C Enterprise Limited www.cel-global.com [email protected]
UK • HK • USA • China • Europe • Australia • Japan
C Enterprise Ltd
Product Code
Charger Input
Charger Output
Boxed Dimensions
Weight
Currently compatible with
- PH-SG01
- 240v AC 50Hz
- 23V DC 500mA
- 155x77x55mm
- approx (6x3x2")
- 0.45Kg (1lb)
- PH01, PH02, PH03, PH04,
PH09, PH10, PH11, PH12
FAQ
POWERhandle refers to the battery pack and handle used to
power compatible
CEL
products, use of the word battery or
batteries refers to the non-removable cells contained within the
POWERhandle.
General
inspection
Regularly
check
that
all
wires and fittings are present and
correct. Any damage increases the risk of electric shock, fire or
damage to person and property.
Dust
Keep
the
products
air
vents
unclogged
and
clean
at
all
times.
Remove
dust
and
dirt
regularly.
Cleaning
is
best
done
with
compressed
air
or
a
rag.
Never
use
caustic
agents
to
clean
plastic
parts.
CAUTION,
Do
not
use
cleaning
agents
to
clean
the
plastic
parts
of
this product.
A
mild
detergent
on
a
damp
cloth
is
recommended.
Water
must
never
come
into
contact
with
the
charger or POWERhandle.
WARNING,
Do
not
use
an
extension
cord to charge.
WARNING,
Charge
indoors
only.
WARNING,
Do not use in wet or damp areas.
Store
the
product,
instruction
manual
and
accessories
in
a
secure,
dry
place.
In
this
way
you
will
always
have
all
the
information
and
parts
ready
to
hand.
This product contains no user serviceable parts. Repairs should
only be carried out by a
CEL
authorised repairer.
18V
My battery is not charging, what’s wrong?
Check
to
make
sure
the
electrical
outlet
is
"
live
"
and
that
the
air
surrounding
the
battery
and
charger
is
between
10ºC and 24ºC (50ºF) and (75ºF). Make sure the
POWERhandle is correctly fitted.
If a Li-ion battery has been subject to an impact, such as being
dropped, the circuit which prevents over discharge can become
damaged, contact your retailer. Extreme impact can cause the
chemicals within the battery to leak, these chemicals are
harmful and should not be touched. Do not charge or attempt to
use the battery. Dispose of appropriately.
What is the best way to care for the batteries in my
POWERhandle?
CEL
uses several types of battery in its range of
POWERhandles, these require different care. NiCD batteries
will perform best if completely discharged before charging, at
least once every five cycles (charge/discharge cycles). NiMh
batteries should be cared for in a similar way but are more
resilient to the “memory effect” than NiCD, Li-ion batteries have
no memory effect so you can charge them at any time. The
charge will be retained in storage for much longer than other
battery technology but should be topped up occasionally as
over discharge can permanently damage the battery.
Always charge POWERhandles before storage. For more
information see www.cel-global.com
How can I get my charger repaired if it is damaged?
Contact your retailer or visit www.cel-global.com
Where can I get replacement parts, advice or help?
Ask at your retailer or visit www.cel-global.com
Maintenance
Manual Version: 120816 - Designed and edited in the UK - Printed in China
