PowerFleet
®
VAC4 and VAC4S Hardware User’s Guide
085-00000700 Rev K
Page 51 of 103
Changing the VAC Data Transmission Settings
Maintenance operator must perform the following:
1.
Log into the vehicle.
2.
Select HARDWARE.
3.
On the “Hardware”
sub-menu,
select ID+RF.
4.
On the “
ID+RF
” sub
-
menu, to change the
RF communication
frequency,
select MyFreq.
D
Data Frequency,
iRF VAC data
transmission
L
Location Frequency, iRF
uses to determine VAC
location
R
Data Rate, iRF data
speed setting
Maintenance operator must perform the following:
1.
Change VAC location
frequency by
selecting
SET LOC and picking
the desired
frequency
Change VAC data
frequency by selecting
SET DATA and picking
the desired frequency.
2.
On the “
ID+RF
”
sub-menu,
select DataRate to
change the VAC
transmission data
rate.