8908519
20 in. Misting Wall/Floor Fan
V4.0
8
For technical questions call 1-800-665-8685
FLOOR MOUNT ASSEMBLY
1. Remove the four
bolts, washers
and nuts (H) from
the legs (F). Set
the hardware
aside (Fig. 2).
2. Insert a leg into
the base plate’s
(E) gaps along
one side. Align
the bolt holes in
the metal plate’s side with the leg’s bolt holes (Fig. 3).
3. Insert a bolt through the base plate and leg. Slide a washer over the
protruding bolt and secure with a nut (Fig. 3). Repeat with a second bolt.
4. Repeat steps 2 and 3 with the other leg. Check and retighten all bolts (Fig. 4).
5. Align the three (3) bolt holes on the middle of the metal plate with the
holes on the wall mount.
6. Insert the bolts (G) through the wall bracket and into the base. Secure each
bolt with a nut (Figs. 5).
MISTING KIT INSTALLATION
1. Attach the misting ring (I) (Fig 6-1) to the grill
on the front of the fan using the cable ties or
clip (included) (Fig. 6-2).
a. Check that each section of hose is firmly
seated.
2. Attach the misting hose valve to a faucet (Fig. 7).
OPERATION
1. Place the fan in an upright position in an area
of the room that will allow for proper air flow.
2. Plug the fan directly into a properly grounded wall outlet.
Fig. 2
Fig. 3
Fig.
Fig. 5
Fig. 6
Fig. 7
