Safety Information (cont.)
WARNING
Read the installation instructions before connecting
the Power over LAN Hub to its power source.
WARNING
Follow basic electricity safety measures whenever
connecting the Power over LAN Hub to its power source.
WARNING
This product relies on the building installation for
short-circuit (over current) protection. Ensure that a
fuse or circuit breaker no larger than 120 VAC, 3A.
U.S. (240 VAC, 1.5A international) is used on the
phase conductor.
WARNING
A voltage mismatch can cause equipment damage
and may pose a fire hazard. If the voltage indicated
on the label is different from the power outlet voltage,
do not connect the Power over LAN Hub to this
power outlet.
WARNING
The Power over LAN Hub "Data In" and "Data &
Power Out" ports are shielded RJ-45 data sockets.
They cannot be used as Plain Old Telephone
Service (POTS) telephone sockets. Only RJ-45 data
connectors may be connected to these sockets.
2002 PowerDsine
All Rights Reserved.
P/N Y1-6040-010
Rev. A0
1-Port
Power over LAN
Hub
User Guide
Notice
It is PowerDsine’s policy to improve its products as
new technology, components, software, and
firmware become available. PowerDsine, therefore,
reserves the right to change specifications without
prior notice.
Trademarks
The product described in this guide is a licensed product of
PowerDsine.
Power over LAN
is a trademark of PowerDsine Ltd.
Technical Support
If you encounter problems when installing or using this
product, please consult the PowerDsine website at:
http://www.powerdsine.com
If these resources don’t provide the help you need,
please contact your local authorized PowerDsine
reseller for additional technical support.
~
~
~
~
~
