after tightening
securely,
nozzle opening should
be pointed
in same direction as
spray bar
nozzle opening
21 in. Surface Cleaner Attachment
Ap31025
WARNING:
To reduce the risk of injury, user must read and under-
stand the operator’s manual for their pressure washer
before using this accessory. Fits most pressure wash-
ers. Ensure compatibility and proper fit before using this
accessory. Wear eye protection marked to comply with
Z87.1. Risk of fluid injections; do not point at people,
pets, electrical devices or the unit itself. Turn off the pres-
sure washer before changing or adjusting accessories.
For cold water use only. Save these instructions. Refer
to them frequently and use them to instruct other users.
If you loan someone this tool, loan them these instruc-
tions also.
pRoduCt SpeCIfICAtIoNS
Connection ....................... 3/8 in. Quick Connect Plug Inlet
Maximum Pressure ....................................... up to 4000 psi
Maximum Water Flow ...............................................4 GPM
Maximum Water Temperature ....................................180°F
ASSemblING the SuRfACe CleANeR
See Figure 1 - 4.
n
Place the legs of the lower handle in the mounting brack-
ets on the surface cleaner deck. Align the holes in the
legs with the holes in the brackets.
n
Insert pin through the holes in the mounting brackets and
legs. Install split-ring through hole on the end of the pin
to secure.
n
Repeat this process to secure the other leg.
n
Attach the top portion of the handle to the lower handle.
Secure with pin and split ring.
n
Apply high strength threadlocker liquid (if needed) to the
ends of the hose.
n
Attach the fixed end of the hose to the trigger handle inlet.
Securely tighten, but do not overtighten.
n
Attach the swivel end of the hose to the inlet on the top
of the surface cleaning deck. Securely tighten, but do not
overtighten.
n
Check the bottom of the surface cleaner deck to verify
that the nozzles are tightened securely and are aligned
correctly.
Fig. 1
Fig. 4
Fig. 2
Fig. 3
split ring
pin
mounting
bracket
lower
handle
leg
upper
handle
lower
handle
split
ring
pin
surface
cleaner
spray
trigger
pin
inlet
plug
