CAUTION
PLEASE NOTE:
*PowerBase Industrial (HK) Ltd. will not be responsible for any
personnel loss and/or injury if the defect was caused by misuse or
mishandling by the user in any way.
Recommended charging temperature is between 15 - 40 degree C.
USER MANUAL
Instructions for Use
Standard Charger
NOTE : 1) Never put Ni-MH and Ni-Cd batteries together in the PowerBase
Charger.
2) For initial use, the batteries may require 2~3 cycles to obtain their
maximum capacity.
C-206
1) Place 2 AA or 2 A AA size batteries into the battery compartment.
Batteries must be inserted properly for good electrical contact
and correct polarity direction.
2) Plug the charger into the wall AC outlet. The red LED indicator
light will glow to indicate a normal charging mode.
3) For each charging period of 18-20 hours is completed,
disconnected the charger from the mains and remove the
batteries.
4) Do not overcharge the batteries beyond the recommended
charging time (20 hours), otherwise it will shorten the lifespan
of the batteries.
1) Before using this charger, read all instructions and cautionary
markings in this manual.
2) This charger is for indoor use only. Do not expose the charger
to rain, snow or moisture.
3) Do not use an extension cord.
4) Do not use the charger if it has received a sharp blow, been
dropped or damaged in any way.
5) Always disconnect the charger from wall outlet if attempting
to clean or inspect he charger or batteries.
6) Do not try to disassemble the charger, take it to a qualified
serviceman when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
7) Do not charge leaking, corroded or dead batteries.
8) Store the charger and batteries in a cool dry place when not in
use. This charger is not intended for young children or infant.
9) Do not disassemble the batteries, short circuit or dispose of in fire.
Ni-Cd AA
Ni-MH AA
Ni-Cd AA
Ni-MH AA
900 mAh
2500 mAh
700 mAh
2300 mAh
300 mAh
800 mAh
7 hours
20 hours
5.5 hours
18 hours
2.5 hours
6 hours
Ni-Cd AAA
Ni-MH AAA
Battery Charge Time :
Chemistry
& Size
*Charging Time
(Approximate)
Battery
Capacity
For 2 AA or 2 AAA batteries
* The charging time is only for general reference. For detail of different charging time require,
please see the PowerBase battery specification and contact PowerBase for the latest information.
A
A
s
iz
e
A
A
A
s
iz
e
A
A
s
iz
e
A
A
A
s
iz
e
CAUTION
PLEASE NOTE:
*PowerBase Industrial (HK) Ltd. will not be responsible for any
personnel loss and/or injury if the defect was caused by misuse or
mishandling by the user in any way.
Recommended charging temperature is between 15 - 40 degree C.
USER MANUAL
Instructions for Use
Standard Charger
NOTE : 1) Never put Ni-MH and Ni-Cd batteries together in the PowerBase
Charger.
2) For initial use, the batteries may require 2~3 cycles to obtain their
maximum capacity.
C-206
1) Place 2 AA or 2 A AA size batteries into the battery compartment.
Batteries must be inserted properly for good electrical contact
and correct polarity direction.
2) Plug the charger into the wall AC outlet. The red LED indicator
light will glow to indicate a normal charging mode.
3) For each charging period of 18-20 hours is completed,
disconnected the charger from the mains and remove the
batteries.
4) Do not overcharge the batteries beyond the recommended
charging time (20 hours), otherwise it will shorten the lifespan
of the batteries.
1) Before using this charger, read all instructions and cautionary
markings in this manual.
2) This charger is for indoor use only. Do not expose the charger
to rain, snow or moisture.
3) Do not use an extension cord.
4) Do not use the charger if it has received a sharp blow, been
dropped or damaged in any way.
5) Always disconnect the charger from wall outlet if attempting
to clean or inspect he charger or batteries.
6) Do not try to disassemble the charger, take it to a qualified
serviceman when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
7) Do not charge leaking, corroded or dead batteries.
8) Store the charger and batteries in a cool dry place when not in
use. This charger is not intended for young children or infant.
9) Do not disassemble the batteries, short circuit or dispose of in fire.
Ni-Cd AA
Ni-MH AA
Ni-Cd AA
Ni-MH AA
900 mAh
2500 mAh
700 mAh
2300 mAh
300 mAh
800 mAh
7 hours
20 hours
5.5 hours
18 hours
2.5 hours
6 hours
Ni-Cd AAA
Ni-MH AAA
Battery Charge Time :
Chemistry
& Size
*Charging Time
(Approximate)
Battery
Capacity
For 2 AA or 2 AAA batteries
* The charging time is only for general reference. For detail of different charging time require,
please see the PowerBase battery specification and contact PowerBase for the latest information.
A
A
s
iz
e
A
A
A
s
iz
e
A
A
s
iz
e
A
A
A
s
iz
e
