Power works XB 20V RSG303, Руководство оператора, Страница: 6 / 28

water. If liquid gets into your eyes, flush them with
clean water for at least 10 minutes, then seek
immediate medical attention. Obey this instruction
will reduce the risk of serious injury.
• Keep these instructions. Refer to them frequently
and use them to instruct others who may use this
tool.
If you borrow someone this tool, loan them
these instructions also to prevent incorrect use of
the machine and possible injury.
3 SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate
the tool better and safer.
Symbol Explanation
V Volts
min
-1
No-load speed
Direct current
Safety alert
Read and understand all instruc-
tions before operating the product,
and follow all warnings and safety
instructions.
Wear ear protection.
Wear eye protection
Do not expose the product to rain
or moist conditions.
Wear a dust mask
Laser radiation. Do not stare into
beam.
No Hands Symbol
No Hands Symbol
No Hands Symbol
Symbol Explanation
Hot Surface
4 RISK LEVELS
The following signal words and meanings are intended
to explain the levels of risk associated with this product.
SYM-
BOL
SIGNAL MEANING
DANGER Indicates an imminently
hazardous situation,which,
if not avoided, will result in
death or serious injury.
WARNING Indicates a potentially haz-
ardous situation,which, if
not avoided, could result in
death or serious injury.
CAUTION Indicates a potentially haz-
ardous situation, which, if
not avoided, may result in
minor or moderate injury.
CAUTION (Without Safety Alert Sym-
bol) Indicates a situation
that may result in property
damage.
5 INSTALLATION
5.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine
before use.
WARNING
• If the parts have damage, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
6
English
EN