background image

SAFE OPERATION 

 

Cautious operation is your best insurance against an accident. Read and understand this section carefully 
before operating the engine. All operators, no matter how knowledgeable they may be, should read this 
and other related manuals before operating the engine or any equipment attached to it. It is the owner’s 
responsibility to instruct all operators in safe operation. Be sure to observe the following for safe 
operation. 
 
 
OBSERVE SAFETY INSTRUCTIONS 

    

Read, understand and follow this “OPERATORS MANUAL”

  

            and “LABELS ON THE ENGINE” before starting and operating 
            the engine. 

    Learn how to operate and work safely. Know your equipment 

      and its limitations. Always keep the engine in good condition. 

    Before allowing other people to use your engine, explain how  

      to operate and have them read this manual before operation. 

    DO NOT modify the engine. UNAUTHORIZED 

 MODIFICATIONS to the engine may impair the function      
 and/or safety and affect engine life.  

 
 
 
WEAR SAFETY CLOTHING 

    DO NOT wear loose, torn or bulky clothing around machinery. 

      Entanglement in rotating parts, controls or projections may cause  
      personal injury. 

    Use additional safety items, e.g. hardhat, eye protection, 

      gloves, etc., as appropriate or required. 

    DO NOT operate machinery or equipment while under the 

      influence of alcohol, medication, or other drugs, or  
      while fatigued.  

    DO NOT wear radio or music headphones while operating engine. 

 

 
 

CHECK BEFORE OPERATING THE ENGINE 

    If the engine is malfunctioning DO NOT operate until repairs 

      are made. 

    Be sure all guards and shields are in place before operating  

      the engine. Replace any that are damaged or missing. 

    Check to see that the area around the engine is clear of foreign  

      objects before starting.  

    Always keep the engine at least 3 feet (1 meter) away from 

      buildings or other facilities. 

    DO NOT allow children or livestock to approach the machine 

      while in operation. 

    DO NOT start the engine by shorting across starter terminals. 

 

 

Содержание PTS-15











































































Отзывы: