FOLDING LADDER
Caterpillar D10T Dozer- Aluminium Ladder
Section 1 Installation Instruction Drawings
25 256 Sht 1
Side Platform
Pg10
PSA-D10T-ALUM-LHS 14-10-14
NOTE
Follow all on-site/Mine lifting and safety procedures when installing
Power Step Ladder System to Dozer.
PROCEDURE
See Dwg. 24 934 Page 10 & 11
1)
Fit the left side platform to the mudguard of the dozer. Fit Side Finger Brackets
under the Beam of the platform per View X. Fit Isolators to the pads on the sides of
the mudguard (front and back). Attach the Finger Brackets to the Isolators with
Isolator Pins per View X.
2)
Fit the Torque Arm across the arm flange at the back of the platform and the Torque
Arm Isolator Bracket, per View Y.
USE SAFE LIFTING AND WORKING PROCEDURES AT ALL TIMES
Note that the platform will be supported by the mountings under it (i, above), it will not be
restarined against rotation until the Torque Arm is attached at both ends per (2).
