Power-Sonic Powerpure RT 1, Руководство пользователя, Страница: 21 / 35

20
3. Operations
3-1 Button operation
3-2 Setup the UPS
Step 1: UPS input connection
Button
Function
ON /ENTER Button

Turn on the UPS: Press and hold ON button for
at least 2 seconds to turn on the UPS.

Confirmcurrentsettings:When the UPS
entersthe setting mode, must press this button
to confirm thesettingsvalue what you
want,nest press up/downbutton to
changesettings information

Out off bypass mode：when the UPS enter to
bypass mode, press and hold this button it will
switch to normal mode.
OFF/ESC Button

Turn off the UPS: Press and hold this button at
least 2 seconds to turn off the UPS in battery
mode. UPS will be in standby mode under
power normal or transfer to Bypass mode if the
Bypass enable setting by pressing this button.

Exit setting mode:Press this button to exit
setting mode when in UPS setting mode,but
save nothing.
UP Button

Up key: Press this button to display previous
selection in UPS setting mode.
DOWN Button

Down key: Press this button to display next
selection in UPS setting mode.

To confirm selectionand exit setting
mode:Press this button to confirm selection
and exit setting mode when LCD display the
last selection in UPS setting mode.
UP + DOWN Button

Setting mode: Press and hold this button for 5
seconds to enter UPS setting mode.