OPERATOR MANUAL
IMPORTANT INFORMATION, KEEP FOR OPERATOR
Information contained in this document is known to be current and accurate at the time of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications. © 2019 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.
2016 Gees Mill Road, Suite 200, Conyers, GA 30013
888-994-7636, fax 888-864-7636
unifiedbrands.net
PART NUMBER 27746, REV. E (11/19)
This manual provides information for:
PS-200
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ,
UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND WARNINGS
CONTAINED IN THIS MANUAL.
NOTIFY CARRIER OF DAMAGE AT ONCE
It is the responsibility of the
consignee to inspect the container upon receipt of same and to determine
the possibility of any damage, including concealed damage. Unified
Brands suggests that if you are suspicious of damage to make a notation
on the delivery receipt. It will be the responsibility of the consignee to file
a claim with the carrier. We recommend that you do so at once.
Manufacture Service/Questions 888-994-7636.
INTRODUCTION AND CONVENTIONS
PRODUCT INTRODUCTION
Thank you for purchasing a Power Soak ware washing machine. Your new Power Soak
pot, pan and utensil washing machine will provide years of dependable, efficient and
trouble-free service. As a Power Soak owner, you will benefit in numerous ways:
Your ware washing operation will be more efficient.
Pots, pans and utensils will be cleaner.
The overall level of sanitation in your scullery area will improve.
Ware washing hours will decrease as employee morale increases.
Chemical and water usage will decrease.
Every machine is manufactured to last, with only high-quality, heavy-duty, 14 gauge
stainless steel used in its construction. All electrical components used in a Power
Soak machine are of the highest quality. The faucets and drains are designed for
quick filling and emptying of the machine’s tanks. At Unified Brands, we take pride
in manufacturing the Power Soak line and are committed to standing behind our
customers and products 100%. Should you ever need assistance, please contact us
directly at the factory by dialing 888-994-7636 or fax: 601-371-9732.
EXPLANATION OF WARNING MESSAGES
Read, understand and follow all DANGER, WARNING, and CAUTION messages located
in this guide and on the equipment.
Personal Injury and Property Damage Hazard
Will result in serious injury
or death. Will cause extensive equipment damage.
Property Damage Hazard
Will result in property or equipment damage.
Chemical Hazard
Will result in serious injury or death. Instructions, labels
and Material Safety Data Sheets (MSDSs) should be supplied with all
detergents and sanitizing chemicals. The manufacturers, importers and
distributors of the cleaning chemicals are responsible for providing this
information.
Personal Injury Hazard
Hazard from sharp objects, scalding, falling and/or
drowning. Will result in serious injury or death.
Personal Injury Hazard
HOT WATER! Wash sink water can exceed 120°F
(49°C). Wear personal protective equipment to avoid scalding or burns.
Personal Injury Hazard
To avoid damaging your Power Soak or risking personal
injury, avoid washing small objects (such as spoons, forks, towels, scrub pads,
or brushes…etc.)unless they are placed in the utensil basket or the designated
utensil area of the AWI.
Children must not be allowed to play in the sinks, on countertops or with the controls
of the Power Soak equipment. Cleaning or use of this machine must not be done by
children without super vision. This machine can be used by children aged 8 years or
above and by persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they are given supervision and instruction concerning use
of the appliance in a safe way and understand the hazards involved. There is a potential
of drowning for any person whose head becomes submerged in the fluid contained in
the sinks along with other hazards identified in this manual.
REQUIREMENTS FOR DETERGENTS AND SANITIZERS
THE POWER SOAK PS-200 REQUIRES A LOW-FOAMING DETERGENT THAT
IS SAFE FOR HUMAN HANDS. THE DETERGENT SHOULD HAVE GOOD
GREASE CUTTING ABILITIES BUT NOT HAVE AN EXCESSIVELY HIGH OR
LOW PH LEVEL. A METAL/ALUMINUM-SAFE FORMULA IS RECOMMENDED.
CONSULT A CHEMICAL PROVIDER FOR A SUITABLE DEEP CLEANING
CHEMICAL.
Detergents
The PS-200 can use two types of detergents, one type for normal cleaning and one type
for “Deep Cleaning” for more effective deep cleaning. The materials to be cleaned and
the type of debris to be removed will be a factor in selecting the proper detergent. Provide
this information to a chemical supplier when selecting the type of detergent. Use of the
correct detergent in the Power Soak machine is critical to its washing performance.
Improper detergents could damage the equipment. If there are problems with cleaning
results, please contact the Power Soak service department 888-994-7636.
