Power Products GUARDIAN S6-ATS, Инструкция по эксплуатации

Страница: 92 / 154

89
Englis
h
11.3 Spark plug maintenance
Spark plug recommendation:
TORCH F6RTC, NGK BPR6ES o equivalent.
1 Open the access back door and unplug the spark plug cap by pulling outward
(as shown with the arrow in the figure below).
2 Using the spark plug spanner, extract the spark plug by unscrewing it from the
engine (turn counter clockwise)
3 Inspect the spark plug visually. Replace with a
new one if the insulator is cracked or chipped.
Clean the electrode with a fine wire brush to clean
the filth deposits.
4 Measure the electrode distance with a gauge.
Normal value 0.6 - 0.7 mm. Adjust the opening
carefully if the value is not correct.
5 Carefully replace the spark plug, begin screwing it
with your hand to avoid damaging the threads. Once
the spark plug is threaded to the end of the thread,
make the final tightening:

New plugs 1/2 turn using the spark plug spanner.

Used spark plugs 1/8 to 1/ 4 turn using the spark plug spanner.
6 Reinstall the spark plug pipette or cap and close the access cap by fastening
with its screw.
SPARK PLUG KEY
ELECTRODE
SPARK PLUG CAP