Power Products GUARDIAN S6-ATS, Инструкция по эксплуатации

Страница: 61 / 154

58
Englis
h
4.2 Battery connection
Before connecting the battery, check that the startup key is in "OFF" position. If
you have any doubts on identifying the engine switch, check chapter
3.1 Control
Panel .
Li-ion battery is installed in a compartment in the front of the engine. Forced air
recirculation produced by the engine front fan ensures optimum battery
temperature.
To facilitate connection of the battery a single connection has been left externally
to avoid the disassembly of any elements for its connection.
1 Open the maintenance door of the generator:
2 Connect the negative battery cable (supplied disconnected) to the engine block
as the figure below:
NOTE: Models GUARDIAN S6-SOL and GUARDIAN S6 ATS use
Li-ion type battery, if you ever replace the battery for any reason, be
sure to use original GENERGY Li-ion battery. Never use other type of
batteries; the charge system of these batteries is different to traditional
batteries
Model GUARDIAN SC-RC uses standard batteries and it could be
replaced by a standard battery with the same features.
NEGATIVE TERMINAL CONNECTION