POWX0480
EN
Copyright © 2013 VARO
P a g e
|
5
www.varo.com
7
OPERATING INSTRUCTIONS
Do not sand plaster surfaces, (WARNING: In this case your guarantee
becomes void) this may clog the motor (brushes, ball bearings, ..).
7.1
Switching On-off
To turn the tool on, push the switch to rightwards and
locate the “On (I)” setting.
To turn the tool off, push the switch to leftwards and
locate the “ Off (0)” setting.
7.2
Attaching the sandpaper
Select sandpaper with the correct grain size. Make
sure the perforations in the paper coincide with
those on the sanding base plate.
The sandpaper should rest flush on the base plate
and must not come loose.
You can be sure to find the right sandpaper among
our product range (see technical specifications).
7.3
Attaching the dust box
Pull and slide dust collection box into the dust extraction port, make sure the latches on the
right and left of the dust collection box are into place before operating.
8 TECHNICAL DATA
Power rating
220 W
Mains voltage
230-240 V
Mains frequency
50 Hz
Sanding surface
140 x 140 x 80 mm
No load speed
13.000 min-1
Weight
2 kg
Safety class
Class II (double insulated)
9
NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
77 dB(A)
Acoustic power level LwA
88 dB(A)
ATTENTION! The sound power level may exceed 85 dB(A), in this case
individual hearing protection shall be worn.
aw (Vibration)
3,95 m/s²
K = 1,5 m/s²
