Power Plus 836613 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 14

Power Plus 836613 Скачать руководство пользователя страница 11

POWPG10240

EN

Copyright © 2019 VARO

P a g e

|

11

www.varo.com

12 EXTENSION CORDS

You should only use extension cords for outdoor use, PVC ordinary duty with a cross sectional
area not less than 1.0mm².
Before using, check the supply and extension cords for signs of damaged during use,
disconnect the cord for signs of damage or aging. If the cord becomes damaged during use,
disconnect the cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the appliance if the cord is damaged or worn.
Keep extension cord away from cutting elements.

Warning: Always ensure that the ventilation openings are kept clear of
debris.

We wish to thank you for choosing our products. We are confident that he high quality of our
machine will meet with your satisfaction and appreciation and that we will give you long-lasting
service.
Before starting to use your machine, make sure to read with care this manual, which has been
purposely drawn up to provide you with all the necessary information for proper use, in
compliance with basic safety requirements.

13 CLEANING AND MAINTENANCE

Warning: Before performing any Maintenance or cleaning work, Always pull
out the mains plug!

Do not spray the unit with water. Ingress of water may destroy the Switch-plug combination
unit and the electric motor. Clean the unit with a cloth, hand brush, etc.
Expert inspection is required, do not make any adjustment by yourself, must contact to
customer Service centre:

▪

If the lawn mower strikes an object.

▪

If the motor stops suddenly

▪

If the blade is bent (do not align!)

▪

If the motor shaft is bent (do not align!)

▪

If a short-circuit occurs when the cable is connected.

▪

If the gears are damaged.

▪

If the v-belt is defective.

14 TROUBLESHOOTING

FAULT

REMEDIAL ACTION

Motor does
not run

▪

Check mains connection cable

▪

Start on short grass or on an area which has already been mown.

▪

Clean discharge channel/housing

–the mowing blade must rotate freely

▪

Correct the cutting height.

Motor power
drops

▪

Correct the cutting height.

▪

Clean discharge channel/housing

▪

Have mowing blade resharpened /replaced -> customer Service centre.

Grass
catcher is
not filled

▪

Correct the cutting height

▪

Allow the lawn to dry

▪

Have mowing blade resharpened /replaced -> customer Service centre.

▪

Clean the grille on the grass catcher

▪

Clean the discharge channel /housing

«
...
9
10
11
12
13
...
»

Содержание 836613















Отзывы:

Нет отзывов