POWX1751
EN
Copyright © 2018 VARO
P a g e
|
9
www.varo.com
11 PNEUMATIC 2-IN-1 COMBI NAILER
11.1
Application
Use for almost any finish, furniture, cabinetry, panelling, trim, or craft application.
11.2
Tool use
▪
Read "Safety Warnings" before using the tool.
▪
Push magazine lock lever and slide upper magazine to open
magazine.
▪
Place strip of nails or staples into the magazine with the point
resting on the fastener guide. Do not load with trigger
depressed.
▪
Push upper magazine back until magazine lock latches.
▪
Keep the nailer pointed away from yourself and others and
connect to the hose.
▪
Position the nailer nose against work piece and pull the trigger.
▪
Disconnect air supply in case a nail or stapler is jammed.
▪
Pull the grease shaft and pull the upper part of the nailer nose
open the magazine in the front. Remove jammed nails or
staples and close the front cover.
▪
Keep the tool pointed away from yourself and others and
connect back to the hose.
If a filter/regulator/lubricator is not installed on the air system, air operated
tools should be lubricated at least once a day or after 2 hours work with 2 to
6 drops of oil, depending on the work environment, directly through the
male fitting in the tool housing.
