Power One AURORA PVI-6000-OUTD-AU Series, Инструкция по установке и эксплуатации

Страница: 20 / 89

Page 20 of 89
(PVI-6000-OUTD-xx-AU Rev:1.0)
3. INSTALLATION
WARNING : The electrical installation of AURORA must be performed
in compliance with applicable local and national standards and laws.
WARNING : The connection of Aurora to the electrical distribution grid
must be performed only after receiving authorization from the utility that
operates the grid.
3.1. Package Inspection
NOTE: The distributor delivered your AURORA to the carrier safely
packaged and in perfect condition. Upon acceptance of the package, the
carrier assumes responsibility for its safe delivery. In spite of careful
handling, transport damage to package or its contents is always a
possibility.
The customer is encouraged to perform the following checks:

Inspect the shipping box for apparent damage, such as holes, cracking or any
sign of possible damage to its contents.

Describe any damage or shortage on the receiving documents and have the
carrier sign his/her full name.

Open the shipping box and inspect the contents for internal damage. While
unpacking, be careful not to discard any equipment, parts or manuals. If any
damage is detected, call the delivering carrier to determine the appropriate
action. Save all shipping material for the event the carrier sends an inspector
to verify damage!

If the inspection reveals damage to the inverter call your supplier, or
authorized distributor. They will determine if the equipment should be
returned for repair. They will also provide instructions on how to get the
equipment repaired;

It is the customer's responsibility to file a claim with the carrier. Failure to file
a claim with the carrier may void all warranty service rights for any damage;

Save the original package your AURORA inverter came in, should you need
to return it for repair in the future.