Power Inspired AG1500-PSU, Быстрый старт

Страница: 1 / 2

AG1500 Quick Start Guide
W: www.powerinspired.com E: info@powerinspired.com
AG1500-QSG-1.3
Thank you for purchasing the Power Inspired AG1500 AC ReGenerator. Please read this
guide carefully before using this product.
Contents
The AG1500-PSU contains:
 The AG1500-PSU
 Instruction Manual
 An IEC mains input lead
 An IEC loop through lead
 A pack of 4 rubber feet
 A jewellers screwdriver
 Vertical Support Brackets
 UPSilon 2000 UPS Software &
Manual
 RS232 & USB Lead
The B2U-96-9 Battery Pack Contains:
 The B2U-96-9 Battery Pack
 Instruction Sheet
 DC Interconnecting Leads
If you are missing any items please contact us.
Battery Connection
The connected battery will allow the AG1500 to continue to provide power in the event of
a power cut. It is not required for the AG1500 to function as a pure AC ReGenerator. If
you do not have a battery pack skip this step.
1. Make sure the AG1500-PSU is unplugged from the mains.
2. Check the battery voltage specification. The correct battery should
have a voltage rating of 96Vdc. The matching battery part number
is B2U-96-9.
3. Make sure the battery circuit breaker is in the OFF position.
4. Remove the two screws of the battery connection cover on the
rear of the AG1500-PSU and one of the covers on the
rear of the B2U-96-9 cabinet (it does not matter which
one). Using the battery lead provided,
connect one end to the AG1500-PSU and
the other to the battery. Ensure a good fit
– they should not be loose when inserted.
5. Switch the battery circuit breaker to the ON
position.
Power Connections
1. Confirm the load rating of your equipment and ensure the total power
consumption is within the rating of the AG1500.
2. Connect your equipment to the Output Socket.
3. Further equipment may be connected by means of the IEC output socket.
4. Connect the Mains Power Lead to the IEC input terminal.
CAUTION: The battery pack is heavy!