Thank You
Congratulations on purchasing your new Power Gear International
Travel Adapter. This adapter includes 4 built-in adapter plugs for over
150 countries. It powers your appliances and charges mobile phones,
tablets and other portable devices.
Thank you for choosing Power Gear.
IMPORTANT SAFETY INSTUCTIONS
WARNING: RISK OF FIRE AND SHOCK
When using your travel adapter, basic precautions should always be
followed, including the following:
a) READ ALL INSTRUCTIONS BEFORE USING
b) DO NOT use this adapter with products containing screw-base
lamp holders (sockets) or convenience receptacles.
c) THIS PRODUCT IS NOT A VOLTAGE CONVERTER. Check the markings
on each appliance and use this adapter only with appliances
rated for both 120 and 240 volts. Using appliances rated only for
120 volts with this adapter may result in a risk of fire, electric shock,
injury to persons, or damage to the appliance.
d) DO NOT use with appliances requiring earth connection.
e) ALWAYS attach the adapter to the plug of the appliance first, then
insert the adapter into the outlet.
f) ALWAYS disconnect the adapter and the appliance from the
electrical outlet when not in use.
g) DO NOT use adapter if it isn’t working correctly, has been
damaged, or dropped in water.
h) INDOOR USE ONLY.
Using this Adapter
The Power Gear International Travel Adapter does not convert voltage.
Use only with dual-wattage appliances rated for both 120V and 240V.
1.
Ensure all adapter plugs are in the retracted/stored position.
2.
Push and hold the button of the needed country plug and gently
slide it outward.
3.
Make sure the button is locked with the desired blade exposed.
4.
Plug your device into the desired outlet on the adapter.
5.
Plug adapter into the local wall outlet.
(A blue LED light will indicate power)
Replacing the Fuse
1.
Locate the fuse on the bottom of the adapter.
2.
Insert screw driver into slot on top of the fuse, then twist to open
the fuse housing.
3.
Turn adapter upside down and empty old fuse into hand.
4.
Insert the new fuse, type T6.3AH, and replace the lid on top of the
fuse housing. Twist lid back into locked position.
94313
