V4.0
8774465
Please read and understand all instructions before use. Retain this manual for future reference.
SPECIFICATIONS
Bucket Capacity
36 quarts
SAFETY
WARNING! Read and understand all instructions before
using this tool. The operator must follow basic precautions
to reduce the risk of personal injury and/or damage to the
equipment.
Keep this manual for safety warnings, precautions, operating
or inspection and maintenance instructions.
1. Use the correct tool for the job. This tool was designed
for a specific function. Do not modify or alter this tool or
use it for an unintended purpose.
2. Operate in a safe work environment. Keep your work
area clean, well-lit and free of distractions. Place lights
so you are not working in a shadow.
3. Control the tool, personal movement and the work
environment to avoid personal injury or damage to tool.
4. Do not operate any tool when tired or under the
influence of drugs, alcohol or medications.
5. Lock tools away and keep out of the reach of children.
6. Wear protective clothing designed for the work
environment and tool.
7. Do not overreach when operating a tool. Proper
footing and balance enables better control in
unexpected situations.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and
inspect for damage. Make sure that all items in the
Identification Key are included.
IDENTIFICATION KEY
A
Wringer Handle
B
Wringer Bucket
C
Bucket
D
Bumper x 4
E
Caster x 4
ASSEMBLY & INSTALLATION
1. Insert a bumper (D) over the stem of each caster.
Insert each caster’s stem into a bottom corner of the
mop bucket. Press down firmly to seat the casters.
2. Leave the cable ties on the wringer basket. Carefully
slide the notch on the basket over the narrower
bucket end. The wringer handle is on the left side of
the bucket.
3. Cut the cable ties and carefully open and close the
wringer a few times to ensure proper operation.
OPERATION
WARNING! Wear appropriate personal protective
gear when using cleaning agents that are caustic
or create fumes.
1. Fill the bucket (C) to a maximum of 2/3 full. This will
prevent dirty water from slopping over the side when
the mop is placed into the water.
2. Lift the mop and let it drain for a few moments before
placing it into the wringer bucket (B).
3. Hold the mop handle and slowly push the wringer
handle (A) forward to press the excess water from
the mop head.
4. Pull the wringer handle back without releasing until
the wringer is fully retracted.
5. Proceed to mop.
CARE & MAINTENANCE
1. Empty all water and let the bucket and wringer
mechanism fully dry to prevent rust.
2. Clean the bucket and wringer with a disinfectant from
time-to-time to prevent scum build up and to avoid
foul smells.
3. Do not leave a wet mop in the wringer basket as it can
promote rust on the metal components.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool
does not function properly or parts are missing. If unable to
do so, have a qualified technician service the tool.
Bucket and Mop Wringer Trolley
