8089245
V 1.2
For any technical questions, please call 1-800-665-8685
2
Clipped Head
Framing Nailer
SPECIFICATIONS
Air Inlet
1.4" NPT
Max. Pressure
120 PSI
Operating Pressure
80 to 110 PSI
Nail Sizes
2" to 3-1/2"
Magazine Capacity
80 pcs.
Recommended Lubricant
Air Tool Oil
Fastener size
2.87-3.33 mm
Air Consumption
0.5 L per fire
Vibration value
3.5 m / s
Noise
98.5 dB(A) (Sound pressure)
/ 112.5 dB(A) (Sound power)
IMPORTANT SAFETY PRECAUTIONS
1. KEEP CHILDREN AWAY. All children should be kept away from the work area. Do not let them
handle the tool.
WARNING: Pneumatic nailers and stapler shall only be used by persons above 18 years old.
Permit only experienced and trained persons to operate pneumatic tools.
2. USE SAFETY GOGGLE AND EAR PROTECTION: Air tool operators and others in work area should
always wear safety glass to prevent the injury from fasteners and flying debris when loading and
unloading this tool. Maybe the noise would harm your hearing, wear the ear protection to safeguard.
(See Fig. 1)
3. NEVER USE OXYGEN, COMBUSTIBLE OR ANY OTHER BOTTLE GAS as a power source or would
cause explosion and serious personal injury. (See Fig. 2)
4. DO NOT CONNECT TOOL TO COMPRESSED AIR which pressure exceeds 120 PSI.
5. DO NOT PLACE OVER-LONG AIR HOSE in working area in case of the operator’s unexpected
tripping. Make sure all connections are tight, the hose should be near to air supply.
6. CARRYING TOOL ONLY BY THE HANDLE. Do not keep the trigger pull on safety yoke mechanism to
avoid unintentional firing of fastener.
7. KEEP THE TOOL POINTED AWAY FROM YOURSELF and others at all time and keep hands, any
body parts away rear area to Safety guard against possible injury.
8. DISCONNECT TOOL FROM AIR SUPPLY BEFORE LOADING fasteners to prevent a fastener from
being fired during connection. (See Fig. 3.)
9. DO NOT KEEP THE TRIGGER OR SAFETY DEPRESSED during loading fasteners or the
unintentional firing of a fastener would cause personal injury.
10. DISCONNECT TOOL FROM AIR SUPPLY HOSE and close the compressor before performing
maintenance, alter the accessories or during non-operation.
