Power Electronics SD750K, Руководство по аппаратному обеспечению и установке

Страница: 96 / 100

SD750K POWER ELECTRONICS
94
ACCESSORIES
EN
ACCESSORIES
Codes and description
CODE DESCRIPTION
SD75ET Ethernet/IP communication board
SD75PN Profinet communication board.
SD75PB Profibus communication board.
SD75CO CANOpen communication board.
SD75EC
Encoder board.
It allows connecting 1 differential Encoder in TTL or HTL, from 5 to 24VDC.
SD75DIO
Digital Inputs / Outputs Expansion board.
It allows increasing the number of inputs and outputs of the drive. It includes:
•
5 Programmable Digital Inputs optically isolated.
•
5 Digital Outputs (Relays).
SD75AIO
Analogue Inputs / Outputs Expansion board.
It allows increasing the number of inputs and outputs of the drive. It includes:
•
2 Programmable Analogue Input.
•
2 Programmable Analogue Output.
SD75FO
Fiber Optic board. It allows communication between multiple drives in a master slave
configuration. This board is optional for drives frame 5 to 8. For frames 9 to 11, it is
supplied by default, along with the modules connection kit.
SD75PT Board for 8 thermal probes type PT100 or PT1000 (configurable).
B150
Dynamic Braking Unit.
(For further information, see section “Dynamic Braking Unit B150”).
SD75DE3 Kit 3 meters Extender for Display.
Communication boards
SD750 Kompakt family is compatible with the most commonly used communication protocols (Profibus-
DP, Profinet, Modbus TCP, Ethernet IP, Field Bus, etc.), thanks to its optional boards.
Refer to the specific manual of each board for further information.
Expansion boards
SD750 Kompakt series is compatible with the most commonly used communication protocols (Profibus,
Profinet, Ethernet I/P, CANOpen, etc.), thanks to its optional boards.
14