Helpline No. UK/Northern Ireland 0151 6491500 Rep. Ireland 1890 946244
Web Support www.einhell-uk.co.uk
Model Number: 43736
12
Cleaning, maintenance and ordering of spare parts
Important!
Always pull out the mains power plug before starting
any cleaning work.
Cleaning
• Keep all safety devices, air vents and the motor housing free of dirt
and dust as far as possible. Wipe the equipment with a clean cloth
or blow it with compressed air at low pressure.
• We recommend that you clean the device immediately each time
you have finished using it.
• Clean the equipment regularly with a moist cloth and some soft
soap. Do not use cleaning agents or solvents; these could attack
the plastic parts of the equipment. Ensure that no water can seep
into the device.
Maintenance
Checking the water intake filter (Fig. 10-11/19)
Periodically check the intake filter in order to prevent clogging,
which could jeopardize operation of the pump.
To do this, unscrew the connection coupling for the water inlet hose
from the device and clean the exposed inlet sieve by placing it under
running water. Then re-fit the filter and connection coupling.
Long periods of non-use (electric pump)
If the machine is going to be stored for longer periods of time
(i.e. over 3 months) in a room where frost could develop, it is
recommended that the machine be filled with an antifreeze
solution (similar to the antifreeze solutions used for vehicles).
When the device is not used for an extended period of time,
lime deposits begin to form in the electric pump, which in turn
can lead to starting difficulties.
