power automation PA 8000 LW Series, Руководство по установке, Страница: 124 / 132

1.
Pack the goods properly.
Controls must be packed in original or equivalent packaging. If
the packaging is not proper, Power Automation will charge a
packaging flat rate.
NOTICE!
Damages due to inadequate packaging Inadequate
packaging may result in damages to the control unit. This
will void the material warranty. PA does not bear any liabili-
ties for damages in transit.
2.
Write the RMA number on the cardboard box clearly readable
from outside.
The incoming goods department rejects all deliveries
without a visible, valid RMA number.
3.
Ship the goods FREE DOMICILE / DDU. Other deliveries will be
rejected.
The goods have to arrive within 4 weeks after the date of the
approved RMA form.
9.4 Training
Having the best CNCs is one thing, to bring out the best of it is the
other.
The PA training program comprises of a number of individually com-
binable training modules which offer you a well-founded knowledge for
using PA CNCs. At our training centers we bring your employees -
beginners and experts- up to scratch in CNC technology. We also offer
individual training courses at your site. The contents of the courses will
be customized to your requirements.
For more information see Ä Chapter 9.1.1 “Service addresses”
on page 119 .
Return
Conditions Of Supply
Training Courses
PA 8000 LW CNC control unit
Service and return process
25.09.2015 | 124