power automation PA 8000 EL Скачать руководство пользователя страница 9

Страница: 9 / 108

1.3 Limitation of liability

All information and notes in this installation manual were compiled

under due consideration of valid standards and regulations, the

present status of technology and our years of knowledge and

experience.

Power Automation can not be held liable for damage resulting

from:

disregarding this installation manual

unintended use

employment of untrained personnel

unauthorized conversions

unauthorized modifications to the software

technical modifications

use of unapproved spare parts

use in conjunction with machines not deemed compatible by

Power Automation

In case of customized versions the actual scope of delivery can

vary from the explanations and representations in this installation

manual, because of the utilization of additional options or due to

the latest technical changes.

Apart from this, the obligations agreed upon in the delivery con-

tract, the general terms and conditions, and the delivery conditions

of Power Automation and the legal regulations valid at the time of

contract apply.

We reserve the right to make technical modifications in order to

improve usability.

1.4 Copyright

This installation manual is protected by copyright law.

Passing this installation manual on to third parties, duplication of

any kind – even in form of excerpts – as well as the use and/or dis-

closure of the contents without the written consent of Power Auto-

mation is not permitted.

Violations oblige to compensation. The right for further claims

remains reserved.

1.5 Warranty terms

The material warranty terms are provided in Power Automation's

terms and conditions as well as inside the sales documents.

Liability

Copyright

Material Warranty

PA 8000 EL CNC control unit

General information

24.09.2015 | 9

Содержание PA 8000 EL













































































































Результаты поиска

Содержание PA 8000 EL

Отзывы:

power automation PA 8000 EL, Руководство по установке, Страница: 9 / 108

Результаты поиска

Содержание PA 8000 EL

Отзывы: