power automation PA 8000 EL Скачать руководство пользователя страница 25

Страница: 25 / 108

The CNC installation folder has been changed. Formerly, every-

thing had been installed in

c:\program files\power automation

In Windows 7 (W7) it is installed under

c:\pacnc

. This is also true

for the files, which are written from the CNC software on

d:\ partition

So there is also a folder called

d:\pacnc

for the files, which are

written from the CNC during runtime. Everything below

c:\pacnc

and

d:\pacnc

is the same as before below

c:\program files\power automation

and

d:\program files\power automation

. For compatibility reasons,

the folders remain

c:\program files\powerautomation

and

d:\program files\power automation

for Windows XP systems.

The PA standard

HMI

is fully compatible. Also every User-HMI,

which is based on HTML will run without problems. User-HMIs,

based on own code (scripts, C, Java or ActiveX) must be tested by

the customer itself.

The usage of

compile cycles

is the same as before.

Old

CNC/HMI Backups

cannot be used in the current version of

3.5.x

, because of the changed installation path. There will be a

future version, which will allow to restore old backups to the new

installation paths.

The material warranty seals affixed to the control unit at various

positions ensure that the control unit's casing is not opened by

unauthorized persons.

Broken or removed seals void all material warranty

provided by Power Automation.

–

Never open the control unit, or you will lose your

material warranty.

–

Always contact Power Automation, if extensions,

repairs or modifications are required (see

Chapter 9 “Service and return process”

on page 95).

New CNC Installation Folder

Compatibility To CNC Versions

Before 3.5.x

Material Warranty Seals

PA 8000 EL CNC control unit

Safety

24.09.2015 | 25

Содержание PA 8000 EL













































































































Результаты поиска

Содержание PA 8000 EL

Отзывы:

power automation PA 8000 EL, Руководство по установке, Страница: 25 / 108

Результаты поиска

Содержание PA 8000 EL

Отзывы: