power automation PA 8000 EL, Руководство по установке, Страница: 10 / 108

1.6 Customer service
Our Customer Service is always available for technical information.
For information on whom to contact by phone, fax, e-mail or via the
internet, see Power Automation's address on page 2.
Additionally, Power Automation staff is always interested in
receiving new information and experiences resulting from the use
of our products, which could be of great value for future improve-
ments.
1.7 Glossary
CMOS - Complementary metal-oxide-semiconductor
CNC - Computerized Numerical Control
DDU - Delivered Duty Unpaid
HMI - Human Machine Interface
The graphical user interface provided by the PA soft-
ware.
IPC - Insulating Piercing Connector
MDI - Manual Data Input
MTBP - Machine Tool Builder's Panel
Panel including the basic requirements for a machine
tool operator: emergency stop push button, cycle start
and stop push buttons, jog plus and minus push but-
tons, feed rate and spindle speed override pots and a
number of auxiliary push buttons.
NC-Start - Numerical Control Start Button
NC-Stop - Numerical Control Stop Button
PA - Power Automation
PAMIO - Power Automation Modular Input Output
Extendable Superbus based interface allowing
connection of additional I/O modules.
PASIO - Power Automation Slot Input Output
Extendable EtherCAT
â
based interface allowing
connection of additional I/O modules.
PC - Personal Computer
PCI - Peripheral Component Interconnect
Personal computer extension for periphery devices
connected to the motherboard.
PLC - Programmable Logic Controller
POU - Program Organization Unit PLC functions, function
blocks and programs are POUs
RMS - Rotating Measuring Systems (Encoder)
Service
PA 8000 EL CNC control unit
General information
24.09.2015 | 10