Poulan Pro 417150 Скачать руководство пользователя страница 3

3

CONGRATULATIONS 

on your purchase of a new tiller. It 

has been designed, en gi neered and manu fac tured to give 

you the best pos sible de penda bil ity and per form ance.
Should you experience any prob lems you can not easily 

remedy, please contact your nearest authorized service 

center.  We have com pe tent, well-trained tech ni cians and 

the proper tools to service or repair this unit.
Please read and retain this manual. The in struc tions will 

enable you to assemble and main tain your tiller prop erly. 

Always observe the “SAFETY RULES”.

CUSTOMER RESPONSIBILITIES

•  Read and observe the safety rules.
•  Follow a regular schedule in maintaining, caring for 

and using your tiller.

• 

Follow instructions under “Maintenance” and “Stor age” 

sections of this Owner’s Manual.

WARNING:  

This unit is equipped with an internal com-

bustion engine and should not be used on or near any 

unimproved forest-covered, brush-covered or grass covered 

land unless the engine's exhaust system is equipped with 

a spark arrester meeting applicable local laws (if any).  If a 

spark arrester is used, it should be maintained in effective 

work ing order by the operator.
In the state of California, a spark arrester is required by law 

(Section 4442 of the California Public Resources Code).  

Other states may have similar laws.  Federal laws apply 

on federal lands.  See your authorized service center/

DEPARTMENT  for spark arrester.

MAINTENANCE  ...................................................11-13

SERVICE & ADJUSTMENTS ...............................14-17

STORAGE ..................................................................18

TROUBLESHOOTING ...............................................19

WARRANTY ...............................................................21

TABLE OF CONTENTS

SAFETY RULES ..........................................................2

CUSTOMER RESPONSIBILITIES ...............................3

PRODUCT SPECIFICATIONS .....................................3

ASSEMBLY ...............................................................4-6

OPERATION ...........................................................7-10

MAINTENANCE SCHEDULE ....................................11

PRODUCT SPECIFICATIONS

Gasolina Capacity: 

3 Quarts (2.8L)  

 Unleaded 

Reg 

u lar

Oil (API-SG-SL): 

SAE 30 (Above 40°F/4°C) 

(Capacity: 20 oz./0.6L) 

SAE 5W-30 (Below 40°F/4°C)

Spark Plug : 

Champion 

 

 

(Gap:  .030"/0.76mm) 

RC12YC

Содержание 417150























Отзывы: