(943) 9500 GB ZUSÄTZE
- 20 -
GB
ADDITIONAL DEVICES
(* Beware! Danger of injury on the cutting edges.
Setting the disk coulter
(*
• Set the cutting depth of the disk coulter at a gap of 5 cm to the
ploughing blade tip.
• The lengthwise fitting position is preselected by moving the carrier
on the console.
Further fitting positions arise by swivelling the eccentric (50)
180°.
• The lateral gap to the
ploughing blade tip
should be 2 - 3 cm.
It is set by swiveling
the eccentric (50).
Spring loaded disk coulter
(*
- This disk coulter can be fitted to all SERVO NOVA ploughs with a
frame height from 72 cm.
Pre-ploughing implements
Maize skimmer, Manure skimmer
These implements are designed to incorporate surface trash
straw or manure in the soil.
• Set the working depth to 1/3 of the total working depth.
• The lengthwise fitting position should lie over or behind the
ploughing blade tip. Where there is a lot of surface growth, or
when ploughing in straw, the pre-ploughing implements should
be set back as far as possible.
Leg deflector (60)
Leg deflector, which are fitted to the ploughing component, serve
to bend the stalks less when ploughing in straw enabling them to
slide off better.
Trashboards (61)
For ploughing in manure or other fertilizers.
• Trashboards for ploughing components of the type UW, W, WSS.
These implements can be used instead of manure mulchers (see
above) but are not very effective with shallow working depths.
Knife coulter (62)
(*
This implement can be used instead of a disk coulter (see above)
however it is not adjustable.
