- 17 -
1800-GB ApplicAtion_3751
A
A
EN
Starting Work
W
W
A transfer, located near the gearing, advises which p.t.o.
speed your mower unit is equipped for.
• Always and only switch the p.t.o. drive on when all
safety devices (covers, protective clothes, casings) are
in proper condition and are attached to the implement
in their safety positions.
- Hook up expander (EX)
EX
3. Pay attention to correct
p.t.o. direction of rotation!
TD8/95/6a
4. Prevent any damage!
The area to be mowed must be free of obstacles
or foreign objects. Such objects (e.g. large
stones, pieces of wood, boundary stones,
etc.) can damage the mower unit.
If, nevertheless, a collision occurs,
• Stop immediately and switch off the drive.
• Check the implement carefully for any damage In
particular check the mowing discs and their drive shafts
(4a).
• If necessary have it checked over in a specialist work
shop as well.
Safety advice
DANGER
DANGER
Life-threatening- by blades thrown away
•
After the first operating hours tighten all
blade screwed connections
•
Check all safety equipment before starting
work. In particular, make sure that the side
safeguards are folded down correctly in the
field transport position.
DANGER
DANGER
Life-threatening danger exists through ejected
parts when removing clogging, changing blades or
adjusting the machine.
•
Stop tractor/trailer unit on level ground and
apply tractor's brakes.
•
Park the mower in working position.
•
Before going back to the machine, make
sure that the pto has stopped and the hy-
draulic hoses are depressurised.
•
Remove the tractor key!
DANGER
DANGER
Life-threatening danger exists through falling off
the machine.
•
Do not climb onto the machine, or play on or
around it.
•
Do let anybody to climb onto the machine,
or play on or around it.
•
Before starting, make sure that no one is
standing on the machine or inits danger
area!
TIP
Further safety instructions: see Supplement A, pt. 1. - 7.)
Important notes prior to starting work
1. Check
- Check condition of blades and blade holder.
- Check mowing discs for damage (see chapter
"Maintenance and Service")
2. Switch machine on only when in working
position and do not exceed the specified p.t.o.
speed (e.g. max. 540 rpm)!
