Pottinger NOVACAT 261 Скачать руководство пользователя страница 12

Страница: 12 / 63

- 12 -

1801-GB-Attchment-3751

Snap ConneCtor

Snap Connector (1)

TIP

The snap connector is not suitable for the type ALPHAM-

OTION MASTER.

1. Mount the expander (EX) in the correct position.

Position A

- before coupling to the tractor

Position B

- after coupling to the tractor and during mowing

2. Mount snap connector (Weiste triangle) onto the front

lifting gear in a vertical position or inclined slightly

forward.

tD28/91/28

3. Lock lower link bolts (2) so that they are free from play.

Insert the lower link pin from the inside out, to avoid

damages to the protective apron. Outside the lower link,

the linch pins are allowed to stick out a maximum, for

correct positions see fig. 1, 2, 3.

Linch pins inside (Fig. 1)

407-12-01

Содержание NOVACAT 261
































































Результаты поиска

Содержание NOVACAT 261

Отзывы:

Похожие инструкции для NOVACAT 261

Бренды по названию

Популярные бренды

Pottinger NOVACAT 261, Руководство оператора

Результаты поиска

Содержание NOVACAT 261

Отзывы:

Похожие инструкции для NOVACAT 261

Бренды по названию

Популярные бренды