Pottinger MERGENTO VT 9220 Скачать руководство пользователя страница 39

Страница: 39 / 63

- 39 -

1900-EN Maintenance_2723

mAiNTENANCE

general

DANgER

Danger to life through being in the movement area

of belt units.

•

Only carry out cleaning or maintenance

work when the machine is in the lowered

working position or locked transport posi-

tion.

Raising the implement

The position (1) at which the jack may be used is indicated

by stickers on both stub axles, left and right.

Dealing with hydraulic lines

WARNINg

Risk of serious injury through escaping oil!

hydraulic systems with gas pressure accumulators,

hydraulic lines may be pressurised even though the

hydraulics have already been uncoupled.

•

Depressurise the relevant oil lines before

carrying out the maintenance!

•

Wear protective clothing!

Depressurising the hydraulic relief

1. Connect the hydraulic lines for the machine's pressure

relief.

2. Open the right side of the pressure relief and set the

control unit to the float position.

3. Check the pressure on the corresponding pressure

gauge. Operate the control unit until the pressure is

completely relieved.

4. Lock the right side of the pressure relief.
5. Repeat this process on the left side of the pressure

relief.

6. Dísconnect the hydraulic lines for the machine's pressure

relief.

gearbox

WARNINg

Risk of being burnt by hot gearbox oil or from the

hot gear housing.

•

Machine operation may cause the gearbox

housing and transmission oil to become hot.

•

Let the gearbox cool down before changing

the oil.

•

Use oil-proof gloves and protective goggles.

Oil quantity:

0.65l litre SAE 80

Oil level check:

The oil level is correct when the gear

oil reaches the inspection glass (1).

Oil change:

After the first 50 hrs,

then every 500 hrs

Chassis

Rigid chassis

Series: MERGENTO VT 9220

No adjustment possibilities:

Содержание MERGENTO VT 9220
































































Результаты поиска

Содержание MERGENTO VT 9220

Отзывы:

Похожие инструкции для MERGENTO VT 9220

Бренды по названию

Популярные бренды

Pottinger MERGENTO VT 9220, Руководство оператора

Результаты поиска

Содержание MERGENTO VT 9220

Отзывы:

Похожие инструкции для MERGENTO VT 9220

Бренды по названию

Популярные бренды