EN
CONTrOL
2101_EN_Steuerung_2310
- 30 -
Reset the counter to the initial value.
Reset the counter to the initial value.
Data menu
M5
Open DATA menu
Requirement:
“START” menu activated
Implementation:
Press key
1
2
3
4
5
Display:
1…
The total counter for the cardan shaft rotation
time (cannot be reset to zero)
2…
Total counter for working hours: Results from the
cardan shaft rotation time in the working position (cannot
be reset to zero). Display in hours and percentage of
total cardan shaft rotation time.
3…
Total counter for headland time: Results from the
cardan shaft rotation time in headland position (cannot
be reset to zero). Display in hours and percentage of
total cardan shaft rotation time.
4…
Total counter for transportation time: Results
from the cardan shaft rotation time in transport
position (cannot be reset to zero). Display in hours and
percentage of total cardan shaft rotation time.
5…
Total area worked. Results from the tractor's
speed signal and the working width. Without a speed
signal from the tractor, the area worked is not calculated.
(Not possible with Select Control Terminal)
keys:
Key
Explanation
STOP - with this key you stop all hydraulic
functions.
Return - with this key you return to the last
menu level - Here: Start menu
Delete - with this key you can delete the
order-related data.
Test menu
M6
Open the TEST menu
Requirement:
“START” menu activated
Implementation:
Press
key
TIP
Navigate the menu by
1. touching the different tabs for the submenu on the
touch screen.
2. using the
/
keys to switch between the
submenus.
