EN
OpErATiON
2101_EN-Operation_2310
- 22 -
Transport by road
Because of its dimensions, the machine is not approved for
road use with increased ground clearance. Transport the
machine on the road only with reduced ground clearance.
Reduce ground clearance:
1. Lower the hoist
2. Lower the green control unit for "working width" until
cylinder movement stops.
The position for transport on the road has been reached.
You can now fold down.
Possible swath forms
TIP
Adjusting the working width on the headland is
recommended to avoid destroying the sward.
Connecting the two belt units by means of the hook is
only possible on the headland.
Centre swath:
- High working width
- Belt direction of both belt units inwards
Side swath:
- Narrow working width
- Belt units connected
- Belt direction: both in one direction ( left/right)
Fold swath apron
CAUTION
Risk of slight or moderate injury through being
crushed.
•
Be careful not to pinch your fingers when
folding the swath apron manually!
1. Pull out the safety bolts (1).
2. Swivel the swath apron up or down.
3. Lock in the relevant position using the safety bolts (1).
Swath apron folded down:
Swath apron folded up:
Extend and retract the swath apron
The swathing apron is operated hydraulically via the grey
control unit.
Locking brake
The machine is equipped with one locking brake per wheel.
NOTE
Risk of material damage due to a locking brake
crank handle not being placed in the park
position.
•
Always place the hand crank in the park
position.
