EN
OpErATiON
2101_EN-Operation_2310
- 20 -
3. Release the brake pressure:
1. Press the push button (2) on the brake valve.
Brake valve position: .
4. Set working height
4
3
TIP
The belt unit should not rest its full weight on the ground
while adjusting the working height.
1. Release the safety (3) on the crank handle.
2. Adjust the working height using the crank handle
(4).
3. Secure crank handle in position using spring pin (3).
Set the working height per side. Set the same height at
all adjustment positions to ensure trouble-free operation.
5. Adjust belt speed
1. Adjust the belt speed at the back of the machine
using the valve for the relevant side.
1… Belt speed left
2… Belt speed right
1
2
6. Set the running direction of the belt units
Set the running direction of the belt units on the control
unit with the following keys.
Press the button for the current direction of travel once
more to stop the belt units.
Both belt units to the centre
Both belt units to the outside
Both belt units to the left
Both belt units to the right
Folding the machine
DANgER
Danger to life through machine tipping over.
•
Only fold the machine on level, firm ground.
DANgER
Danger to life through moving components when
folding.
•
Make sure that the swivel range is clear and
that no-one is standing in the danger area.
•
Do not engage the PTO drive until all guards
are in place and ready for use.
•
Do not enter the danger area yourself.
