Pottinger MERGENTO VT 9220 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 63

background image

1900_GB-PAGE 2

Product liability, information obligation

Product liability obliges manufacturers and dealers to issue operating instructions for the machine at the point of sale and to instruct

the customer on the operation, safety and maintenance regulations governing the machine.
Confirmation is required to prove that the machine and the operating instructions have been properly handed over. For this purpose

you have received a confirmation e-mail from Pöttinger. If you have not received this mail, please contact your local dealer. Your

dealer can fill in the handover declaration online.

For the purposes of product liability law, every farmer is an entrepreneur.
In the terms of product liability law, damage to property is any damage arising due to the machine, but not to the machine, and an

excess (500 euros) exists for this liability.
Corporate damage to property within the terms of the product liability law is excluded from this liability.

Be advised!

The operating instructions must also be handed over with any subsequent machine sale or transfer and the transferee

must be instructed in the regulations stated.

Pöttinger - Trust creates Affinity - since 1871

"Quality pays for itself." Therefore we apply the highest quality standards to our products which are constantly monitored by our

in-house quality management and our management board. Because the safety, perfect function, highest quality and absolute

reliability of our machines in operation are the core competencies for which we stand.
There may be deviations between these instructions and the product as we are constantly developing our products. Therefore no

claims may be derived from the data, illustrations and descriptions. Please contact your Specialist Service Centre for any binding

information about specific features of your machine.
We would ask you to please understand that changes to the scope of supply with regard to form, equipment and technical

specifications are possible at any time.
Any form of reprint, translation or reproduction, including excerpts, requires the written approval of Pöttinger Landtechnik GmbH.
All rights according to copyright laws remain expressly reserved by Pöttinger Landtechnik GmbH.

© Pöttinger Landtechnik GmbH – 31st October 2012

Refer to PÖTPRO for additional information about your machine:

Are you looking for suitable accessories for your machine? No problem! All the information you require is here at your disposal.

Scan the QR code on the machine's type plate or look under www.poettinger.at/poetpro
And if we don't have what your looking for, then your Specialist Service Centre is there for you with help and advice.

«
1
2
3
4
...
»

Содержание MERGENTO VT 9220
































































Отзывы:

Нет отзывов

Похожие инструкции для MERGENTO VT 9220

Бренд: Gamry Instruments Страницы: 69

Бренд: Gamry Instruments Страницы: 30

Бренд: Gamry Instruments Страницы: 88

Бренд: Rayger Страницы: 2

Бренд: XanLite Страницы: 4

Бренд: Park House Healthcare Страницы: 32

Бренд: Agilent Technologies Страницы: 114

NTP TECHNOLOGY DAD Thunder Core 256

Бренд: DAN Страницы: 16

Pro hunter 2525

Бренд: SprotDog Страницы: 28

Бренд: Barikell Страницы: 32

Бренд: Gardol Страницы: 80

Бренд: Ignis Pixel Страницы: 4

Deep Root Planter 1.8m

Бренд: Zest 4 Leisure Страницы: 5

Бренд: Faro Страницы: 161

Бренд: LABORIE Страницы: 116

Бренд: Fisher Scientific Страницы: 44

Бренд: KUHN Страницы: 112

Бренд: stilum Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды