Pottinger LION 4000, Руководство оператора

Страница: 7 / 39

- -
(873) AnBAu 0000-GB
COnnECTing TO TraCTOr
GB
Quick-coupler
Both quick-couplers can be pinned (B) in four positions.
Implement should be connected as close as possible to tractor.
- Insert pins (B) in the appropriate position and secure with linch pin.
Connecting to the tractor
- Insert mounting bar (Category II / III) into the lower links and secure with linch
pin.
Variation: Quick-coupler
- Release locking hooks by pulling rope (S).
- Let rope go and locking hooks remain released.
- Swing mounting bar into quick-coupler using the servo-valve.
Locking hooks then lock automatically.
- Secure upper link (1) and set implement horizontally.
Connect drive shaft
- Check drive shaft length and adapt if necessary before initial operation.
See chapter "Drive Shaft" in Supplement B also.
Connecting drive shaft section to rotary harrow
- Remove guard plate (60).
- Place drive shaft with overload cut-out into drive stub and wedge in with
screw.
- Refit guard plate (60).
Disconnecting from tractor
- Park implement on firm and even ground.
- Uncouple drive shaft from tractor.
- Remove upper link from implement.
Variation: Quick-coupler
- Release locking hooks by pulling on rope (S) and swing mounting bar out of
the quick-coupler.
- Remove rope (S) from tractor cabin.
Variation